Table of Contents
Advertisement
timers bgp
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
timers bgp keepaliveTime holdTime
no timers bgp [ keepaliveTime [ holdTime ] ]
Command introduced before JunosE Release 7.1.0.
Sets keepalive and hold-time timers for all neighbors. The no version restores the default
values.
keepaliveTime—Interval in seconds between keepalive messages, in the range 0–65535
seconds; default value is 30; a value of zero prevents BGP from sending keepalive
messages
holdTime—Period in seconds that BGP waits for keepalive messages before declaring
the neighbor to be unavailable, in the range 0–65535 seconds; default value is 90; a
value of zero informs BGP not to expect any hold-time messages
Router Configuration
Chapter 8: T Commands
1311
Advertisement
Table of Contents
