Tunnel Session-Key-Outbound - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel session-key-outbound

Syntax
Release Information
Description
Options
Mode
1374
tunnel session-key-outbound outSAalgorithms spi
{ encryptKey authKey | encryptKey | authKey }
no tunnel session-key-outbound
Command introduced before JunosE Release 7.1.0.
Specifies the encryption and authentication algorithm set, SPI, and session keys for
manual outbound SAs. The no version removes the keys.
outSAalgorithms—Algorithms to use for manual outbound SAs; use the online Help to
see a list of available algorithms
spi—Number that uniquely identifies an SA, in the range 256–4294967295
(0xFFFFFFFF)
encryptKey—Encryption key; string of hexadecimal characters; length varies according
to algorithm
DES—16 hexadecimal characters for the 8-byte key
3DES—48 hexadecimal characters for the 24-byte key
MD5—32 hexadecimal characters for the 16-byte key
SHA—40 hexadecimal characters for the 20-byte key
authKey—Authentication key; string of up to 48 characters
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.