tunnel mpls autoroute announce
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] tunnel mpls [ traffic-eng ] autoroute announce [ ospf | isis ]
Command introduced before JunosE Release 7.1.0.
Configures the LSP tunnel to register its endpoint (the egress router) with the configured
routing protocol so that the protocol can use the tunnel to determine routes. If you do
not specify a routing protocol, the default is both IS-IS and OSPF. The no version disables
endpoint announcements.
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
ospf—Endpoint is announced to OSPF
isis—Endpoint is announced to IS-IS
Interface Configuration, Tunnel Profile Configuration
Chapter 8: T Commands
1355