Shutdown - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

shutdown

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] shutdown
Command introduced before JunosE Release 7.1.0.
In Controller Configuration Mode, disables CT3, E3, SONET, and T3 controllers. These
controllers are disabled by default. In Interface Configuration mode, disables Ethernet
interfaces, the HDLC layer of serial interfaces, and the SONET layer of ATM or POS
interfaces. These interfaces are enabled by default. In Subinterface Configuration mode,
disables ATM 1483, Ethernet, Frame Relay, PPPoE, and VLAN subinterfaces. These
subinterfaces are enabled by default. The no version restarts disabled controllers,
interfaces, and subinterfaces.
Controller Configuration, Interface Configuration, Subinterface Configuration
Chapter 7: S Commands
1177