Tacacs-Server Key - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tacacs-server key

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
tacacs-server key keyValueString
no tacacs-server key
Command introduced before JunosE Release 7.1.0.
Sets or resets the authentication and encryption key value shared by all TACACS+ servers
that do not have a server-specific key set up by the tacacs-server host command. The
no version removes the key value shared by all TACACS+ servers.
keyValueString—String of up to 100 characters; must match key configured on the
TACACS+ daemon
Global Configuration
Chapter 8: T Commands
1275