Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
threshold-test
Syntax
Release Information
Description
Options
Mode
1306
threshold-test startup { falling | rising | risingorfalling }
threshold-test absolute-value rising risingValue falling fallingValue
threshold-test event { rising eventOwner eventName | falling eventOwner eventName |
delta-rising eventOwner eventName | delta-falling eventOwner eventName }
threshold-test delta-value rising risingValue falling fallingValue
no threshold-test [ startup | absolute-value | delta-value | event rising | event falling |
event delta-rising | event delta-falling ]
Command introduced before JunosE Release 7.1.0.
Defines the values for an SNMP threshold-test trigger. The no version deletes the
threshold-test values for this trigger or removes either the threshold startup condition
or event binding.
startup—Startup threshold condition that you predict the sample to follow
falling—Specifies that the sample values are expected to be falling values
rising—Specifies that the sample values are expected to be rising values
risingorfalling—Specifies that the sample values might be either rising values or
falling values
absolute-value—Specifies that the trigger is monitoring absolute threshold values
risingValue—Rising threshold value for the trigger, in the range
-2147483648–2147483648
fallingValue—Falling threshold value for the trigger, in the range
-2147483648–2147483648
event—Binds an event owner and name to specific events on which the threshold-test
might trigger: rising values within a sample, falling values within a sample, rising values
between samples, or falling values between samples
eventOwner—Event owner name; string of up to 32 alphanumeric characters
eventName—Event name; string of up to 32 alphanumeric characters
delta-value—Specifies that the trigger is monitoring the difference (delta)( between
sample values
SNMP Trigger Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
