Show Tunnel-Server - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show tunnel-server

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show tunnel-server [ config ] [ interfaceSpecifier ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays status and configuration information for dedicated and shared tunnel-server
ports configured on the router. You can display information for a specific tunnel-server
port or for all tunnel-server ports.
config—Displays configuration information about available and provisioned
tunnel-service interfaces on each port, and indicates whether modules that support
dedicated or shared tunnel-server ports are currently installed in the router
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5 ; port number specified must have the
dedicated or shared tunnel-server port assigned to it
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
1167