Snmp-Server Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

snmp-server group

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
snmp-server group groupName securityModel authenticationLevel [ read readView ]
[ write writeView ] [ notify notifyView ] [ storageType ]
no snmp-server group groupName securityModel authenticationLevel
Command introduced in JunosE Release 7.1.0.
Dynamically configures an SNMP server group. The no version removes the dynamically
created group.
NOTE: You must access the CLI at privilege level 15 to view or use this
command.
groupName—Name of the SNMPv3 group
securityModel—Security model
v1—SNMPv1
v2c—SNMPv2c
usm—SNMPv3
authenticationLevel—Method for authentication and privacy
none—No authentication and no privacy
auth—Authentication only
priv—Authentication and privacy
readView—Name of the view for read access; the default is no access
writeView—Name of the view for write access; the default is no access
notifyView—Name of the view for notification; the default is no access
storageType—Storage type
volatile—Loses contents on warm or cold start
nonvolatile—Preserves contents across warm or cold start. This is the default.
Global Configuration
Chapter 7: S Commands
1193