Sscc Retrytimer - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

sscc retryTimer

Syntax
Release Information
Description
Options
Mode
1228
sscc retryTimer timer
no sscc retryTimer [ timer ]
Command introduced before JunosE Release 7.1.0.
Configures the delay period during which the SRC client (formerly SSCC) waits for a
response from an SRC (formerly SDX or SSC) server. When the timer expires, the client
submits the request to the next server and waits again for the timer to expire. The request
is sent to each timer in rotation until there is a response. The no version restores the
default delay period, 90 seconds.
timer—Time in the range 5–300 seconds
Global Configuration
Copyright © 2010, Juniper Networks, Inc.