Tunnel Mpls Affinity - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel mpls affinity

Syntax
Release Information
Description
Options
Mode
1354
tunnel mpls [ traffic-eng ] affinity affinity [ mask mask ]
no tunnel mpls [ traffic-eng ] affinity
Command introduced before JunosE Release 7.1.0.
Assigns an affinity to the tunnel that specifies the class of resources—resource
attributes—associated with the tunnel. The no version removes the affinity from the
tunnel.
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
affinity—Attributes that must be configured on the interface in order to be considered
by the tunnel; in the range 0x0–0xFFFFFFFF; default value is 0x0
mask—Mask to identify attributes to be checked and therefore the attribute flags that
a link (interface) must have in order to be used by a tunnel: a 1 signifies that the attribute
value must match the tunnel's corresponding affinity bit; a 0 signifies that the attribute
value does not matter and does not have to match the tunnel's affinity bit; in the range
0x0–0xFFFFFFFF; default value is 0x0000FFFF
Interface Configuration, Tunnel Profile Configuration
Copyright © 2010, Juniper Networks, Inc.