Subscriber-Policy - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

subscriber-policy

Syntax
Release Information
Description
Options
Mode
1240
[ no ] subscriber-policy subscriberPolicyName
Command introduced before JunosE Release 7.1.0.
Creates a nondefault subscriber policy for a subscriber (client) interface that belongs to
a bridge group or to a VPLS instance, and accesses Subscriber Policy Configuration mode
from which you define the policy. A subscriber policy is a set of forwarding and filtering
rules that specifies how the subscriber interface handles various packet types. The no
version removes the nondefault subscriber policy from the router.
You cannot change the default subscriber policy values for trunk (server) interfaces that
belong to a bridge group or to a VPLS instance. You also cannot change the default
subscriber policy values for a VPLS virtual core interface, which acts as a trunk interface.
The VPLS virtual core interface represents all the MPLS tunnels from the router to the
remote VPLS edge (VE) devices.
subscriberPolicyName—Name of the subscriber policy; alphanumeric string of up to 32
characters
Global Configuration
Copyright © 2010, Juniper Networks, Inc.