Tacacs-Server Host - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tacacs-server host

Syntax
Release Information
Description
Options
Mode
1274
tacacs-server host ipAddress [ port portNumber ]
[ timeout timeoutValue ] [ key keyValueString ] [ primary ]
no tacacs-server host ipAddress
Command introduced before JunosE Release 7.1.0.
Adds or deletes a host to or from the list of TACACS+ servers. If the host is not assigned
as the primary host, the router assigns an existing host as the primary. The no version
deletes the host from the list of TACACS+ servers.
ipAddress—IP address of the TACACS+ server
portNumber—TACACS+ server's TCP port number in the range 1–655535
timeoutValue—Response timeout interval for the TACACS+ client to server exchange;
number in the range 1–255; default value is 5
keyValueString—Secret used in TACACS+ client to server exchange; string of up to 100
characters
primary—Assigns the host as the primary host
Global Configuration
Copyright © 2010, Juniper Networks, Inc.