Strip-Domain - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

strip-domain

Syntax
Release Information
Description
Options
Mode
1236
strip-domain { enable | disable }
no strip-domain
Command introduced before JunosE Release 7.1.0.
Strips the domain name from the username before sending an access-request message
to the RADIUS server. The domain name is the text after the last @ character. For example,
xyz.com is the domain name of the following: fred@abc.com@xyz.com. To stop stripping
the domain name, use the disable keyword. The no version resets the default, disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Domain Map Configuration
Copyright © 2010, Juniper Networks, Inc.