Sscc Option - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

sscc option

Syntax
Release Information
Description
Options
Mode
1224
sscc option { user-ip-mask-override | send-calling-station-id |
send-local-qos-profile-config }
no sscc option
Command introduced in JunosE Release 10.2.0.
send-calling-station-id keyword added in JunosE Release 11.1.0.
send-local-qos-profile-config keyword added in JunosE Release 11.2.0.
When used with the user-ip-mask-override option, enables the user IP address mask to
be sent to the Policy Decision Point (PDP) in place of the interface IP address mask for
a virtual router. If user IP address mask is not available, then the interface IP address
mask is sent. The no version disables user IP address mask override.
When used with the send-calling-station-id option, enables the calling station ID to be
sent to the PDP for a virtual router. The no version disables the option to send the calling
station ID.
When used with the send-local-qos-profile-config option, enables the local QoS profile
attachment information to be sent to the PDP for a virtual router. The no version disables
the option to send the local QoS profile attachment information.
user-ip-mask-override—Enables user IP address mask to be sent to PDP.
send-calling-station-id—Enables calling station ID to be sent to PDP.
send-local-qos-profile-config—Enables local QoS profile attachment information to
be sent to the PDP.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.