Traffic-Class-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

traffic-class-group

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1332
[ no ] traffic-class-group trafficClassGroupName
[ slot slotNumber | auto-strict-priority | extended ]
Command introduced before JunosE Release 7.1.0.
Configures a traffic-class group. The no version deletes the selected traffic-class group.
You must remove all local (slot-based) instances of a traffic-class group before you can
remove the global group.
trafficClassGroupName—Name of the traffic class group; up to 31 characters
slotNumber—Number of the slot associated with the group, in the range 0—17
auto-strict-priority—Specifies strict-priority scheduling for the group, regardless of
whether the scheduler profile associated with the group node specifies strict-priority
scheduling. Only one auto-strict-priority group can exist; this is the default behavior
for a group.
extended—Specifies that strict-priority scheduling for the group is determined by the
scheduler profile associated with the group node; scheduling is either hierarchical
round-robin or strict priority, but if a strict-priority traffic-class group already exists,
this group must scheduled via HRR
Global Configuration
Configuring Traffic Classes That Define Service Levels
Configuring Traffic-Class Groups That Define Service Levels
Configuring QoS for an L2TP Session
Copyright © 2010, Juniper Networks, Inc.