Tunnel Checksum - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tunnel checksum

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] tunnel checksum
Command introduced before JunosE Release 7.1.0.
IP Tunnel Destination Profile Configuration mode added in JunosE Release 8.2.0.
In Interface Configuration mode, enables end-to-end checksum computation for static
GRE tunnels.
In IP Tunnel Destination Profile Configuration mode, enables end-to-end checksum
computation for dynamic GRE tunnels. The no version disables the checksum option.
Interface Configuration, IP Tunnel Destination Profile Configuration
Chapter 8: T Commands
1343