Subscriber Disconnect - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

subscriber disconnect

Syntax
Release Information
Description
Mode
1238
[ no ] subscriber disconnect
Command introduced before JunosE Release 7.1.0.
Enables the E Series router to receive RADIUS-initiated disconnect messages from the
RADIUS server. The no version restores the default, in which support for RADIUS-initiated
disconnect messages is disabled on the router.
NOTE: This command and the RADIUS dynamic-request server feature
replace the radius disconnect client command, which has been deprecated
and may be removed completely in a future release. The RADIUS Disconnect
Configuration mode has also been deprecated.
RADIUS Configuration
Copyright © 2010, Juniper Networks, Inc.