Show Subscribers - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show subscribers

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
To display detailed information:
show subscribers [ ipv6 [ ipv6Prefix ] ]
[ domain domainName | icr-partition icrPartitionLocationId |
interface { atm | ethernet | lag } interfaceSpecifier |
port interfaceSpecifier | slot slotNumber | username userName |
virtual-router vrName ] [ filter ]
To display summary information:
show subscribers summary [ domain | icr-partition | interface | port | slot | virtual-router
]
[ filter ]
Command introduced before JunosE Release 7.1.0.
interface, atm, and ethernet keywords added in JunosE Release 7.3.0.
slot keyword and slotNumber variable added in JunosE Release 7.3.0.
icr-partition keyword and icrPartitionLocationId variable added in JunosE Release 10.3.0.
lag keyword added in JunosE Release 11.0.0.
Displays the active subscribers on your router.
ipv6—Displays IPv6 subscribers for the domain
ipv6Prefix—Prefix that defines the IPv6 network that you want to filter
userName—Username of active subscriber
domain—Displays active subscribers for the domain
domainName—Domain name matching usernames of active subscribers
icr-partition—Displays active subscribers for the ICR partition
icrPartitionLocationId—A unique identifier for each ICR partition on a chassis. Note that
this ID different from the partition ID, which is configured using the ip vrrp vrid
icr-partition partitionId command. The partition location ID that you specify here is a
combination of the interface within the chassis on which the ICR partition is configured
and the VRRP ID, which is system-defined and nonconfigurable.
interface—Displays active subscribers for the specified interface: atm, ethernet, or lag.
In the summary version, displays active subscribers for all ATM, Ethernet, and LAG
interfaces
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
port—Displays active subscribers for the port
slot—Displays active subscribers for the slot
Chapter 7: S Commands
1145