T1 Snmp Trap Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

t1 snmp trap link-status

Syntax
Release Information
Description
Options
Mode
1270
[ no ] t1 channel [ /subchannel ] snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables processing of SNMP link status information about a T1 or fractional T1 channel
on a CT3 interface. The no version disables the processing of SNMP link status information.
channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
subchannel—Specifies the FT1 subchannel on a T1 interface, in the range 1–24
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.