Show Lldp Remote-Global-Statistics; Table 395: Show Lldp Remote-Global-Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show lldp remote-global-statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show lldp remote-global-statistics
Command introduced in Junos OS Release 10.0 for EX Series switches.
Display remote Link Layer Discovery Protocol (LLDP) global statistics.
This command has no options.
view
Configuring LLDP (CLI Procedure) on page 2842
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2759
show lldp remote-global-statistics on page 3004
Table 395 on page 3003 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 395: show lldp remote-global-statistics Output Fields

Field Name Field Description
Information about remote database table counters.
LLDP Remote
Database Table
Counters
Time elapsed between LLDP agent startup and the last change to the remote
LastchangeTime
database table information.
Inserts Number of insertions made in the remote database table.
Deletes Number of deletions made in the remote database table.
Drops Number of LLDP frames dropped from the remote database table because of
errors.
Number of remote database table entries that have aged out of the table.
Ageouts
Chapter 92: Operational Commands for Access Control
show lldp remote-global-statistics
3003