Mark-Exp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

mark-exp

Syntax
Release Information
Description
Options
Mode
Related Topics
1260
[ no ] [ suspend ] mark-exp expValue [ mask expMask ] [ profile ProfileName ]
Command introduced before JunosE Release 7.1.0.
profileName variable added in JunosE Release 7.2.0.
Defines an MPLS policy rule that specifies the value of the EXP bits. The no version
removes the rule from the policy list; the suspend version temporarily suspends the policy
rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the mark-exp
command, which may be removed completely in a future release.
expValue—EXP bit value assigned to packets; number in the range 0–7
expMask—Mask applied to modify some of the EXP bits in IP packet; integer in the
range 1–7
profileName—Name of the rate-limit profile to be used in a policy (up to 40
alphanumeric characters)
Classifier Group Configuration
Assigning Values to the ATM CLP Bit
Policy Rule Precedence
Copyright © 2010, Juniper Networks, Inc.