Mark-De - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

mark-de

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ suspend ] mark-de deValue
Command introduced before JunosE Release 7.1.0.
Marks the DE bit in the Frame Relay header of packets matching the current classifier
control list. The no version removes the mark rule from a policy list; the suspend version
temporarily suspends a mark rule; the no suspend version resumes application of a
suspended rule.
NOTE: This command replaces the Policy List Configuration version of the mark-de
command, which may be removed completely in a future release.
deValue—Value of the DE bit; 0 or 1
Classifier Group Configuration
Assigning Values to the ATM CLP Bit
Policy Rule Precedence
Chapter 13: M Commands
1259