ST STM32F301 6 Series Reference Manual page 261

RM0366
Bits 16:12 SQ7[4:0]: 7th conversion in regular sequence
These bits are written by software with the channel number (1..18) assigned as the 7th in the
regular conversion sequence.
Note: Software is allowed to write these bits only when ADSTART=0 (which ensures that no
Note: Analog input channel 0 is not mapped: value "00000" should not be used
Bit 11 Reserved, must be kept at reset value.
Bits 10:6 SQ6[4:0]: 6th conversion in regular sequence
These bits are written by software with the channel number (1..18) assigned as the 6th in the
regular conversion sequence.
Note: Software is allowed to write these bits only when ADSTART=0 (which ensures that no
Note: Analog input channel 0 is not mapped: value "00000" should not be used
Bit 5 Reserved, must be kept at reset value.
Bits 4:0 SQ5[4:0]: 5th conversion in regular sequence
These bits are written by software with the channel number (1..18) assigned as the 5th in the
regular conversion sequence.
Note: Software is allowed to write these bits only when ADSTART=0 (which ensures that no
Note: Analog input channel 0 is not mapped: value "00000" should not be used
regular conversion is ongoing).
regular conversion is ongoing).
regular conversion is ongoing).
RM0366 Rev 5
Analog-to-digital converters (ADC)
261/874
277