If-Match Tag; Ip Ip-Prefix - 3Com 5500G-EI Command Reference Manual

228 C 6: U R
HAPTER SING

if-match tag

ip ip-prefix

P C
OUTING ROTOCOL OMMANDS
[SW5500]route-policy permit node 1
% New sequence of this list
[SW5500-route-policy]if-match ip next-hop ip-prefix p1
Syntax
if-match tag
undo if-match tag
View
Route Policy view
Parameter
Enter the value in tag field of OSPF route information.
value
Description
Use the
if-match tag
information.
Use the
undo if-match tag
Related commands:
if-match ip next-hop
apply cost, apply local-preference, apply origin
Example
Define one match sub-statement and enable the OSPF route information whose
value of tag is 8 to pass the match sub-statement.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]route-policy permit node 1
% New sequence of this list
[SW5500-route-policy]if-match tag 8
Syntax
ip_prefix_name
ip ip-prefix
network len
[ greater-equal
undo ip ip-prefix
]
View
System View
Parameter
ip_prefix_name
address prefix list uniquely.
Identify an item in the prefix address list. The item with smaller
index_number
index-number will be tested first.
value
command to match the tag field of OSPF route
command to cancel the existing matching rules.
if-match interface
,
if-match cost
[ index
greater_equal
ip_prefix_name
Enter the specified address prefix list name. It identifies one
, ,
if-match acl if-match ip-prefix
, ,
route-policy apply ip next-hop,
and
index_number
] { permit | deny }
| less-equal
index_number
[ index
,
.
apply tag
less_equal
]
| permit | deny