Table of Contents
Advertisement
GE Healthcare
Revision 1
Job Card ELE A050 - Changing Senographe Internal IP Addresses
9
STEERING GUIDE FOR FUTURE COMPONENT UPGRADES
If you ever upgrade the software on any of the Senographe components in the future you must ensure
that the internal IP addresses are reconfigured back to their default values before you run the software
upgrade for that component. To do this you would proceed as described in the following sub section.
9-1
Steering Guide for Future AWS Software Upgrades on the ADS Computer
If you want to upgrade the AWS Workstation software on the ADS Computer, proceed as follows:
•
Perform
Section 7-6, page 762
default 192.168.1.0 network address scheme.
•
Run the upgrade of the AWS Workstation software on the ADS Computer.
•
Perform
Section 7-6, page 762
preferred network address scheme (e.g. 192.168.100.0 network).
9-2
Steering Guide for Future Software Upgrades on the IDC
If you want to upgrade the software on the IDC, proceed as follows:
•
Perform
Section 1, page 758
•
Perform
Section 7-6, page 762
default 192.168.1.0 network address scheme.
•
Run the upgrade of the software on the IDC.
•
Perform
Section 1, page 758
192.168.100.20).
•
Perform
Section 7-6, page 762
preferred network address scheme (e.g. 192.168.100.0 network).
9-3
Steering Guide for Future Software Upgrades on the Gantry CPU
If you want to upgrade the software on the Gantry CPU, proceed as follows:
•
Perform
Section 7-4, page 760
192.168.1.40.
•
Perform
Section 7-6, page 762
default 192.168.1.0 network address scheme.
•
Run the upgrade of the software on the Gantry CPU.
•
Perform
Section 7-4, page 760
192.168.100.40).
•
Perform
Section 7-6, page 762
preferred network address scheme (e.g. 192.168.100.0 network).
Chapter 7
Service Information and Procedures Class A 2385072-16-8EN
to reconfigure each of the files on the ADS Computer back to their
to reconfigure each of the files on the ADS Computer back to your
to reconfigure the IDC back to the default IP address of 192.168.1.20.
to reconfigure each of the files on the ADS Computer back to their
to reconfigure the IDC back to your preferred IP address (e.g.
to reconfigure each of the files on the ADS Computer back to your
to reconfigure the Gantry CPU back to the default IP address of
to reconfigure each of the files on the ADS Computer back to their
to reconfigure the Gantry CPU to your preferred IP address (e.g.
to reconfigure each of the files on the ADS Computer back to your
Page no. 770
Senographe DS
JC-ELE-A-050.fm
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated