GE Senographe DS Manual page 743

GE Healthcare
Revision 1
8-2 Unlocking and Locking the On Screen Display (OSD) for 19" Monitors
If the message OSD Locked appears on the AWS Monitor when pressing any of the keypads, or if you
can only access the Hotkey menu (see image below) the monitor is locked.
You can unlock the OSD with the following button sequence:
• Press
the Key4 button
You can also use the same button sequence to lock the OSD.
• After unlocking the OSD, press
JC-ELE-A-043.fm
Service Information and Procedures Class A 2385072-16-8EN
once then press the Key2 button three times.
the Key1 button
Job Card ELE A043 - AWS Monitor Calibration
once to open ths OSD menu.
Page no. 743
Senographe DS
Chapter 7