GE Senographe DS Manual page 995

GE Healthcare
Revision 1
5-2-1-2 Penduick and above V3 Control Stations and V4 Control Stations
1. Carefully remove the caps from each corner of the Omega window.
2. Remove each of the four screws and plastic washers from each corner of the Omega window, and
remove the Omega window to reveal the RJ-45 Service connector (1).
3. Use a straight Ethernet cable to connect the network interface card (NIC) of your laptop to the RJ-45
Service connector (1) in the Control Station.
1
JC-DIAG-A-005.fm
Service Information and Procedures Class A 2385072-16-8EN
1
Page no. 995
Job Card DIAG A005 - Error Log Retrieval
Senographe DS
Chapter 9