Table of Contents
Advertisement
GE Healthcare
Revision 1
2-2
Power-Up Sequence
No
Start the power-up sequence by
pressing
200PL1 DE6, or
DE5 only lit?
200PL1resistor
R5 OK?
200PL1: Resistor
good continuity
with associated
circuit boards ?
Yes
Check cables connected to
XJ8 and XJ9 on 200PL1.
Change 200PL1.
JC-TSG-A-020.fm
Start the power-up sequence
Yes
200PL1 DE5
and DE7 both
lit?
Yes
button on console.
button on
console steadily
lit and PL2 DE1
No
lit?
Yes
A
No
No
200PL2 voltage
on PT20 at 0 V?
No
No
Change resistor R5.
No
Service Information and Procedures Class A 2385072-16-8EN
Job Card TSG A020 - Generator Power-Up Sequence Flow Charts
"STOP" button
on console lit?
See
Keep–Alive Voltage
Checks on 200PL1 on
page
1074.
button on
console blinking?
Yes
B
200PL2 voltage
on PT2 at 12 V?
Yes
Yes
Change 200PL2.
Page no. 1071
No
200PL1 DE4,
DE6, DE5, and
DE7 all lit?
No
Yes
No
Start the power-up sequence by
pressing "ON" switch on 200PL1.
200PL2 DE1 lit?
Yes
Check connector 400PL1 XJ8.
Change X-ray Console.
200PL2 voltage
on PT5 = 12 V?
No
Yes
200PL2: Isolate the emergency off
circuit by placing strap between
PT0VV and PT1.
200PL2 DE1lit?
Power–up
No
sequence started?
Yes
Problem with connector XJ1. Replace
the cable connecting with 400PL1.
Senographe DS
No
Chapter 9
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated