GE Senographe DS Manual page 608

GE Healthcare
Revision 1
Job Card ELE A020 - Declare and Set Printers (Filming Devices)
7-3-5 DryView 8610 DICOM printer
This printer is already in the install base and can no longer be purchased. It is replaced by the Kodak
DryView 8900 DICOM printer. However, if you need to declare these printers, the settings are as follows:
• DICOM printer label: Any name you wish to see appearing on the Film Composer, e.g., Kodak 8610.
• Hostname: Use printer Hostname if any, or a name unique to your Network, e.g., kodak1printer.
• Network address: A unique IP address given by the hospital Network Administrator), e.g.,
3.48.16.135.
• Application Entity Title (AET): Must be IMN_9410
• Port number:
• Layouts:
• Film size:
• Pixel size
• Configuration information Must be LUT=0,3
• Density
• Magnification type:
• Smoothing factor:
• Trim:
• Printer Memory Size
Chapter 7
Service Information and Procedures Class A 2385072-16-8EN
Must be 1024
Must be 1 x 1 , 1 x 2
Must be 8 in x 10 in
38.75
Must be Min : no value Max : 350
Must be Cubic
Must be 1
Must be NO
Must be 80
Page no. 608
, 2 x 1 , or 2 x 2
W = 5192 H = 6201
Senographe DS
JC-ELE-A-020.fm