Table of Contents
Advertisement
GE Healthcare
Revision 1
4. At the Hostname screen, type the Hostname to be used for the Acquisition Workstation in the Host-
name field, and press <Return> when done. Then press the <F2> key to continue.
- Hostname - - - - - - - - - - - - - - - - - - - - - - - - - - - -
On this screen .................................
A host name must be .............................
.................................................
Note:
The Hostname will automatically be used as the DICOM A.E. Title for the workstation. If there is
more than one Senographe system on the hospital site, the names chosen must clearly differenti-
ate between them. For example, by include the unit number or name.
Do not use the following characters in the Hostname:
!
$ "
ONLY USE ALPHANUMERIC CHARACTERS WITHOUT SPACES.
It is also possible to use the characters - (dash) and . (dot).
Ensure that the Hostname is no more than 12 characters long.
The Hostname must be the same value as the Station Name that is defined in
- AWS Configuration on page
5. At the IP Address screen, type the external IP address to be used for the Acquisition Workstation in
the IP address field, and press the <Return> key when done. Then press the <F2> key to continue.
- IP Address - - - - - - - - - - - - - - - - - - - - - - - - - - -
On this screen .................................
IP addresses must .............................
.................................................
6. At the Subnets screen, ensure that Yes is selected for the System part of a subnet option, and press
the <F2> key to continue.
- Subnets - - - - - - - - - - - - - - - - - - - - - - - - - - - -
On this screen .................................
> To make a selection .............................
.................................................
JC-ELE-A-021.fm
Hostname :
'
'
{ }
[
]
*
573.
IP address :
System part of a subnet :
X
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A021 - Networking Connection and Configuration
@ # ? ^ _ / etc.
Yes
No
Page no. 629
Senographe DS
Job Card ELE A013
Chapter 7
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated