GE Senographe DS Manual page 406

GE Healthcare
Revision 1
Job Card PHY A004 - Radiation Screen Installation
6-2 Installation
1. According to the site configuration, remove the edge pinch (1) on the side where the radiation screen
can be introduced. To do this, remove the two screws (2) and remove the edge pinch and its pinch
plate.
1
2. Carefully put the radiation screen (3) in place. The vertical felt bands (4) must be located towards the
back of the Control Station.
3
4
Chapter 6
Service Information and Procedures Class A 2385072-16-8EN
Page no. 406
Senographe DS
2
JC-PHY-A-004.fm