GE Senographe DS Manual page 929

GE Healthcare
Revision 1
3-8 Error codes from 170/yyy: Bucky
Code Category
170/000 INHIBIT
170/001 DEBUG
ONLY
170/002 INHIBIT
170/003 INHIBIT
170/004 INHIBIT
170/005 DEBUG
ONLY
ERR-SUB-A-003.fm
Service Information and Procedures Class A 2385072-16-8EN
Text in Log File or
on LCD
GRID NODE This error is linked to an invalid command sent by
ERROR Poseidon (exposure time out of range for instance).
1. Reboot the system from the X-ray Console.
2. If the problem persists, check the CAN bus
GRID NODE Command not processed because the previous com-
ERROR mand is being processed.
Ignore this error.
GRID NODE This error is linked to a system CAN overrun, object
ERROR lost.
1. Reboot the system from the X-ray Console.
2. If the problem persists, check the overall system
GRID NODE This error is due to an invalid PDO length.
ERROR
1. Reboot the system from the X-ray Console.
2. If the problem persists, check the overall system
3. If the problem persists, change the Bucky and
GRID NODE The Gantry CPU heartbeat was not received.
ERROR
1. Reboot the system from the X-ray Console.
2. If the problem persists, check whether this failure
3. If the error 162/007 is raised, check Poseidon-
GRID NODE This error is due to a correlation error and is linked to
ERROR a Bucky step lost error.
1. Reboot the system from the X-ray Console.
2. If the problem persists, change the Bucky and
Note: If this error occurs more than five times per
month, change the Bucky.
ERR SUB A003 - Gantry Error Messages
Possible Cause/Recommended Action
Poseidon-Bucky.
CAN bus.
CAN bus.
check the mechanical thickness.
is reported on other nodes meaning that Gantry
CPU does not send system heartbeats. Hence
replace Gantry CPU board (re-calibrate the colli-
mator afterwards).
Stereotix CAN bus.
check the mechanical thickness.
Page no. 929
Senographe DS
Job Card
D/R A255
page
1339
ELE A015
page 579
D/R A190
page
1131
CAL A029
page
1683
ELE A028
page 679
D/R A255
page
1339
ELE A015
page 579
Chapter 9