GE Senographe DS Manual page 508

GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card PHY A040 - Remove/Reinstall Control Station Covers
2. Connect the ground cable to the right-hand side of the Omega cover.
3. On one edge pinch, loosen the two screws (1) and remove the two screws (2).
1
2
4. Remove the edge pinch and its pinch plate.
5. Attach the two screws (3) to secure the same side of the Omega cover (3 mm allen wrench) to the
Chapter 6 Page no. 508
JC-PHY-A-040.fm