Job Card Ele A052 - Back-Up/Restore Procedure - GE Senographe DS Manual

Hide thumbs Also See for Senographe DS:
Table of Contents

Advertisement

GE Healthcare
Revision 1

Job Card ELE A052 - Back-up/Restore Procedure

1
SUPPLIES
For optionally backing up the AWS parameters to external media:
Blank DOS formatted HD 3.5 floppy disk
blank CD-R
(for V3/V4 Control Stations)
2
TOOLS
None
3
REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 10 minutes
4
SAFETY PRECAUTIONS
No specific safety precautions are applicable.
5
PREREQUISITES
None
6
BACKUP/RESTORE PROCEDURE
Backup and restore procedures are described on the following pages.
! Notice:
If backup to floppy disk or CD-R is not possible, it is necessary to record AWS parameters manu-
ally so that they can be restored later (e.g., after an upgrade procedure). Refer to
- Back-up/Restore Procedure - AWS Parameters Manual Record Sheets on page 801
able form.
! Notice:
An AWS backup from a particular ADS version can only be restored to the same ADS version. Un-
less it is written in the Upgrade Procedure, it is prohibited to perform a backup and restore from
different ADS/IDC versions, since the file structure may vary between the different versions. If you
try to restore an ADS/IDC backup to a different version, you will corrupt the AWS/IDC installation
and cause system problems. If you are backing up a system before upgrading the ADS version,
record the AWS parameters manually so that they can be manually restored later (see
A003 - Back-up/Restore Procedure - AWS Parameters Manual Record Sheets on page
JC-ELE-A-052.fm
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A052 - Back-up/Restore Procedure
(for V1/V2 Control Stations)
Page no. 771
Senographe DS
Chapter 7
Form LBK A003
for a suit-
Form LBK
801).
Chapter 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents