GE Senographe DS Manual page 674

GE Healthcare
Revision 1
Job Card ELE A023 - Declare Worklist Hosts
6. Click Query. The Query definition window like the following appears.
7. Select All systems in modality from the Which system section.
! Notice:
If you do not get a response when "refreshing" using All systems in modality, select All
systems.
Worklist servers cannot always handle a filtered query such as "All systems in modality". This is
since the query places the AWS hostname in the DICOM tag (0040,0001)= "Scheduled Station AE
Title".
8. Click Save as default to freeze the selection.
7 TROUBLESHOOTING
• Use the "Ping" command to test access to the worklist server.
• Use the "SendEcho" command to test DICOM association (most worklist servers can support it).
• Double check AE Title declaration on each side.
• See log ~sdc/senovision/logfiles/trace.Worklist.log.
Chapter 7
Service Information and Procedures Class A 2385072-16-8EN
Page no. 674
Senographe DS
JC-ELE-A-023.fm