Table of Contents
Advertisement
GE Healthcare
Revision 1
ERR SUB A003 - Gantry Error Messages
Code
Category
132/051
DEBUG
ONLY
132/052
DEBUG
ONLY
132/053
DEBUG
ONLY
132/054
DEBUG
ONLY
132/055
DEBUG
ONLY
132/056
DEBUG
ONLY
132/057
DEBUG
ONLY
132/058
DEBUG
ONLY
132/059
DEBUG
ONLY
132/060
DEBUG
ONLY
132/061
DEBUG
ONLY
132/062
DEBUG
ONLY
132/063
DEBUG
ONLY
132/064
DEBUG
ONLY
Chapter 9
Text in Log File or
on LCD
TILT INVALID
ABSOLUTE_ENCO
DER_RANGE_ERR
OR
TILT INVALID
FORCE_SENSOR_
RANGE_ERROR
TILT INVALID
SOFTWARE_ERRO
R
TILT INVALID
GO_ROTATION_FAI
LURE
TILT INVALID
GO_ANGULATION_
FAILURE
TILT INVALID
OVERSPEED_ERR
OR
TILT INVALID
UNDERSPEED_ER
ROR
TILT INVALID
POSITION_ERROR
TILT INVALID
DECELERATION_E
RROR
TILT INVALID
MOVEMENT_REVE
RSE_DIRECTION
ERROR
TILT INVALID
INTERNAL_SOFTW
ARE_ERROR
TILT INVALID
DSP_TIMEOUT_EL
APSED ERROR
TILT INVALID
TRANSMIT_QUEUE
_FULL ERROR
TILT INVALID
NO_PREVIOUS_UIF
_EVENT ERROR
Service Information and Procedures Class A 2385072-16-8EN
Possible Cause/Recommended Action
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Ignore this error. If the problem persists, contact your
OLC.
Page no. 898
Senographe DS
Job Card
ERR-SUB-A-003.fm
- Quick Links:
- Err Sub A001 - Generator Error...
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Senographe DS and is the answer not in the manual?
Questions and answers
G.E.Essential l have recently bought What is the full weight.of the mamo Full weight of the console and other İtem's also measurements of each item with the main machine please All this Shipping Company required
The GE Senographe DS mammography machine is shipped in three crates with the following dimensions and weights:
- Crate 1 (Gantry, Generator Cabinet, and ramp):
- Dimensions: 2066 mm (81.34 in) depth × 848 mm (33.39 in) width × 2292 mm (90.24 in) height
- Mass: 641 kg (1410.2 lbs)
- Crate 2 (Control Station):
- Dimensions: 1110 mm (43.70 in) depth × 770 mm (30.31 in) width × 1850 mm (72.83 in) height
- Mass: 210.5 kg (464.07 lbs) for truck transport (without side covers and lid)
- Mass: 223.5 kg (492.73 lbs) for plane/boat transport (with side covers and lid)
- Crate 3 (Detector):
- Dimensions: 872 mm (34.33 in) depth × 2270 mm (89.37 in) width × 260 mm (10.24 in) height
- Mass: 104.4 kg (229.68 lbs)
### Total Mass:
- For truck transport: 641 + 210.5 + 104.4 = 955.9 kg (2104.95 lbs)
- For plane/boat transport: 641 + 223.5 + 104.4 = 968.9 kg (2133.61 lbs)
These values include the gantry, generator cabinet, control station, detector, and all related components.
This answer is automatically generated