GE Senographe DS Manual page 727

GE Healthcare
Revision 1
6-8 What If...
• If nothing happens when you follow the operating instructions:
- Check the system power.
- Check for loose cable connections.
• If the scanner does not scan a bar code symbol:
- Ensure that the scanning system is programmed to scan the type of bar code you are trying to
scan. Refer to Section 6-6-3.
- Check that the bar code symbol is not defaced.
- The scan head must touch and cover every bar and space on the symbol as shown below. You
can tilt the scanner forward or backward to achieve a successful decode. Simple practice quickly
shows what tolerances to work within.
JC-ELE-A-042.fm
Service Information and Procedures Class A 2385072-16-8EN
Right
Page no. 727
Job Card ELE A042 - Bar Code Scanner (Option)
Wrong
Senographe DS
Chapter 7