GE Senographe DS Manual page 672

GE Healthcare
Revision 1
Job Card ELE A023 - Declare Worklist Hosts
Note:
RIS systems typically utilize the HL7 language. If it does not have integrated DICOM conversion,
an HL7 to DICOM interface/broker must be used. This is the sites responsibility.
! Notice:
Worklist server configuration is the responsibility of the RIS administrator.
You must give the AWS RIS/Worklist Application Entity Title to the RIS/PACS administrator.
The Application Entity Title is WL_XXXX, where XXXX is the Station Name (defined in
ELE A013 - AWS Configuration on page
working Connection and Configuration on page
your worklist.
Example: If the AWS hostname and Station Name is aws1, the Application Entity Title declared
inside the worklist server MUST be WL_aws1. The port number is always 4006.
Note:
Incorrect declaration of Application Entity Title is the most common issue related to worklist oper-
ation.
If you witness problems, ensure that the Station Name (defined in
figuration on page
nection and Configuration on page
3. Click Save.
4. In the RIS host selection window, click Done (on V1/V2 Control Stations) / OK (on V3/V4 Control Sta-
tions).
Chapter 7
Service Information and Procedures Class A 2385072-16-8EN
573) matches the hostname (defined in
625).
Page no. 672
RIS/Worklist icon name
573) and hostname (defined in
625). Otherwise, you will not be able to update
Job Card ELE A021 - Networking Con-
Senographe DS
RIS hostname
RIS AE Title Values provided
by the
RIS IP address
worklist server
administrator
RIS Port #
Job Card ELE A021 - Net-
Job Card ELE A013 - AWS Con-
Job Card
JC-ELE-A-023.fm