GE Senographe DS Manual page 1163

Hide thumbs Also See for Senographe DS:

Table of Contents

GE Healthcare

Reassembly of the Lift Board

1. Put the new Lift Board in place being careful not to pinch any of the existing cables in the area.

2. Use the six screws (1) to secure the new Lift Board (cross-head screwdriver) to the side of the Gan-

3. Carefully reconnect all of the cables to the new Lift Board as summarized in the diagram above and

table below.

JC-DR-A-201.fm

Service Information and Procedures Class A 2385072-16-8EN

Page no. 1163

Job Card D/R A201 - Lift Board

Senographe DS

Show Quick Links

Table of Contents

Troubleshooting