GE Senographe DS Manual page 1205

GE Healthcare
Revision 1
3-5-1 Compression Covers - non-available covers
• If the reference of the defective part appears in the following table, it cannot be replaced individually.
A complete set of covers must be ordered and installed:
- Order a set of covers as listed below:
• Refer to section 3-8 page 1210
• After installation of the Arm Cover Rework Assembly, install the new covers using the information
given in Job Card PHY A044 - Remove/Reinstall Gantry
the installation of arm covers, you need to consider the case "flexible covers".
•
3-5-2 Compression Covers - available covers
• If the reference of the defective part appears in the following table, it can be replaced individually.
The table indicates the necessary part(s) to be ordered
If the defective part is:
2401145-2 Compression Cover Upper
2401147 Compression Cover Lower
Order also:
• Install the new cover(s) using the information given in
try Covers, section 8 page
JC-DR-A-210.fm
Service Information and Procedures Class A 2385072-16-8EN
Reference of defective part
2375040 2401145
2375040-3
2375041 2375041-3
Reference
2375037-4
2375038-4
2412297
2401145-2
2401147
2375043-2
2375044-2
2399858-2
5130589 Kit of screws and caps for covers
2352894-2
to install the
526.
Job Card D/R A210 - Gantry cover replacement guide
Description
Compression Cover Upper
Compression Cover Lower
Description
Arm Cover Left
Arm Cover Right
Arm Cover Rework Assy
Compression Cover Upper
Compression Cover Lower
Head Cover Left
Head Cover Right
GE Logo D60
Handle assembly
Arm Cover Rework Assembly.
Covers,
Order the following parts:
Reference
2401145-2 Compression Cover Upper
2401147 Compression Cover Lower
5130589 Kit of screws and caps for covers
Job Card PHY A044 - Remove/Reinstall Gan-
Page no. 1205
Senographe DS
Quantity
1
1
1
1
1
1
1
1
1
1
section 8 page 526. Note that for
Description Quantity
1
1
1
Chapter 9