GE Senographe DS Manual page 759

GE Healthcare
Revision 1
cd /idc
6. Transfer the thisbox.cfg file to the AWS /tmp directory by entering:
get thisbox.cfg
7. Disconnect the current FTP session with the IDC by entering:
bye
The FTP connection with the IDC closes and you are returned to the usual ADS command prompt in
the command window.
8. Make a backup copy the original thisbox.cfg file (file containing the IDC IP address (192.168.1.20)) to
the /export/home/extra_tmp/IPbak directory, by entering:
cp /tmp/thisbox.cfg /export/home/extra_tmp/IPbak/thisbox.cfg.original
9. Open the thisbox.cfg file with the textedit command, by entering:
textedit thisbox.cfg
The thisbox.cfg file appears in an X-Windows based TextEdit application window.
10. Within the TextEdit application window, change the current IDC IP address from 192.168.1.20 to your
preferred new address (e.g. 192.168.100.20).
11. Save the file (File > Save) and click the
tor.
Note:
When clicking File, you may not see the Save drop-down sub-menu option. If this case, hold the
left mouse button down and drag down the blank drop-down menu to display the sub-menu choic-
es.
12. Make a backup copy the newly modified thisbox.cfg file (file containing the new IDC IP addesss) to
the /export/home/extra_tmp/IPbak directory, by entering:
cp /tmp/thisbox.cfg /export/home/extra_tmp/IPbak/thisbox.cfg.new
13. Connect to the IDC via FTP again, by entering:
ftp idc
JC-ELE-A-050.fm
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A050 - Changing Senographe Internal IP Addresses
Edit IDC IP Address
button in the top left of the TextEdit window to exit the edi-
Page no. 759
Senographe DS
Chapter 7