GE Senographe DS Manual page 1202

GE Healthcare
Revision 1
Job Card D/R A210 - Gantry cover replacement guide
3-4 Arm Covers
• Refer to section 3-4-1 page 1203
can be replaced individually, or if a complete set must be ordered and installed.
• Order and install the specified parts. Use a copy of the table given in
to list the parts to be ordered.
• After installing the new covers, verify that the positioner reaches rotation and angulation limit posi-
tions correctly, and that no cable is twisted or under excessive strain.
Arm Cover
Left
Chapter 9
Service Information and Procedures Class A 2385072-16-8EN
and section 3-4-2 page 1203
Page no. 1202
to determine if the defective cover(s)
Order Summary on page 1214
Arm Cover
Right
Senographe DS
JC-DR-A-210.fm