GE Senographe DS Manual page 294

GE Healthcare
Revision 1
Central Listing
4-5. Bucky Board PL302
• Board-Bucky PL302; see component index page 157
DS2
DS3
DS6
J3
LED
DS1
DS2 Data CAN reception
DS3 RT2 Synchro Grid
DS4
DS5
DS6 Microcontroller Debug
DS7 Microcontroller Heartbeat
DS8 Microcontroller Debug
DS9
DS10
DS11 Optical Fork Behavior
Chapter 3
J1
DS8
DS7
DS9
DS10
J4
Function
48 V
Not present
Not present
5 V
3.3 V logic
Service Information and Procedures Class A 2385072-16-8EN
.
J2
Color
Green ON when the 48 V DC supply voltage is OK
OFF when the 48 V DC supply voltage is defec-
tive
Yellow ON when CAN data (or command) received.
OFF when no CAN data (or command) received.
Yellow n/a
n/a n/a
n/a n/a
Green n/a
Green Blinks once every second when the Bucky board
is okay
Blinks more than once a second or is constantly
ON or constantly OFF when the bucky board is
faulty
Green n/a
Green ON when the 5 V supply voltage is OK
OFF when the 5 V supply voltage is defective
Green ON when the 3.3 V supply voltage is OK
OFF when the 3.3 V supply voltage is defective
Green ON when the optical fork on the Bucky is
masked (i.e. the Bucky grid is initialized)
OFF when the optical fork on the Bucky is not
masked (i.e. the Bucky grid is no initialized)
Page no. 294
Senographe DS
J5
DS11
Behavior
Indicators and Switches.fm