Job Card Loto A001 - Lock-Out / Tag-Out (Loto) Procedures - GE Senographe DS Manual

GE Healthcare
Revision 1

Job Card LOTO A001 - Lock-Out / Tag-Out (LOTO) Procedures

1 INTRODUCTION
Lock-out / Tag-out (LOTO) is a process that ensures all energy sources are locked in a safe condition,
and remain secured in order to prevent the unintentional energizing of equipment.
This Job Card establishes the minimum requirements according to European Law on Occupational
Health and Safety and the GEHC Standards, for locking out live power in order to achieve the power iso-
lation required to carry out any installation, de-installation, maintenance, or repair work on the Senogra-
phe system.
All authorized personnel are required to follow these instructions, as well as any other safety procedures
related to the operation of the Senographe system, or to work carried out in areas close to the Senogra-
phe system.
WARNING
Failure to isolate dangerous power sources may cause serious injury or death.
2 SUPPLIES
LOTO KIT
JC-LOTO-A-001.fm
Service Information and Procedures Class A 2385072-16-8EN
Job Card LOTO A001 - Lock-Out / Tag-Out (LOTO) Procedures
A
C
D
Page no. 377
B
E
G
F
H
Senographe DS