Job Card D/R A205 - Lift Motor - GE Senographe DS Manual

GE Healthcare
Revision 1

Job Card D/R A205 - Lift Motor

1 SUPPLIES
Determine the type of Lift Screw Assembly that is installed in the system, as indicated below.
TABLE 1 - LIFT SCREW ASSEMBLY TYPE IDENTIFICATION QUICK GUIDE
Manufacturing Date
Physical Identification Method
(required on Type 1 or Type 2 systems to
know if Lift Screw Assembly upgraded to
newer type)
L-bracket at top of Lift Screw Assembly
Motor power cable
Motor earth cable
Motor brake cable
Order the appropriate Lift Motor according to the Type of Lift Screw Assembly installed in the system:
• For systems with Type 1 and Type 2, order a Type1/Type 2 Compatible Lift Motor (5212900)
• For systems with Type 3, order a Type 3 Lift Brake Motor (5413527)
2 TOOLS
Standard Tool Box
3 REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 45 minutes
4 SAFETY PRECAUTIONS
WARNING
While working on the column mechanism, shut down the equipment and switch off the
Senographe hospital supply circuit breaker. Lock it in the off position or mark it clearly
with a warning sign to prevent others from applying power.
JC-DR-A-205.fm
Service Information and Procedures Class A 2385072-16-8EN
Lift Type in Install Base System
No brake
(Type 1)
pre-January 2008
Black with no Silver with threaded
threaded holes
YES
NO
NO
Page no. 1179
Job Card D/R A205 - Lift Motor
Top brake
(Type 2)
January 2008
holes
YES
YES
NO
Senographe DS
Chapter 9
Brake motor
(Type 3)
June 2011
Silver with no
threaded holes
YES
YES
YES
Chapter 9