R&S ZNB Series User Manual page 516

®
R&S ZNB/ZNBT
[SENSe:]CORRection:CKIT:DMODe
[SENSe:]CORRection:CKIT:DELete
Query connector types and calibration kits:
[SENSe<Ch>:]CORRection:CONNection:CATalog?
[SENSe:]CORRection:CKIT:CATalog?
Import Cal Kit... / Export Cal Kit...
The buttons below the "Connector Type" list are used to store cal kit data to a file and
to reload previously stored cal kit files. By default, calibration kit files are stored in the
C:\Users\Public\Documents\Rohde-Schwarz\Vna\Calibration directory;
see Chapter 4.5.2.4, "Cal kit
Remote command:
MMEMory:LOAD:CKIT
MMEMory:STORe:CKIT
Kit Standards dialog
The "Kit Standards" dialog shows the calibration standards in a selected calibration kit.
It is also used to modify the contents of a user-defined kit.
Related information
Refer to the following sections:
●
Chapter 4.5.2.4, "Cal kit
●
Chapter 5.11.2.2, "Calibration Kits
●
Chapter 4.5.2.1, "Calibration standard
Access:
User Manual 1173.9163.02 ─ 62
Files",
Files",
Calibration Kits dialog
on page 179.
on page 179
dialog", on page 514
types", on page 175
> "Standards..."
GUI reference
Cal softtool
516