R&S ZNB Series User Manual page 987

®
R&S ZNB/ZNBT
Parameters:
<Stop>
Example:
Manual operation:
CALCulate<Chn>:STATistics:EPDelay[:STATe] <Boolean>
CALCulate<Chn>:STATistics:MMPTpeak[:STATe] <Boolean>
CALCulate<Chn>:STATistics:MSTDdev[:STATe] <Boolean>
These commands display or hide the "Phase/El Length" results, the "Min/Max/Peak-
Peak" results, and the "Mean/Std Dev" results in the diagram area of trace no. <Chn>.
Suffix:
<Chn>
Parameters:
<Boolean>
Example:
Manual operation:
CALCulate<Chn>:STATistics:FORMat <Format>
For complex-valued traces (Smith, Polar) this determines how the MEAN, STDDev,
MAX, MIN, RMS and PTPeak statistics are calculated, see
STATistics:RESult?.
Suffix:
<Chn>
Parameters:
<Format>
Manual operation:
CALCulate<Chn>:STATistics:NLINear:COMP:LEVel <dBValue>
Defines the compression value x for the compression point measurement for dB for-
matted traces.
User Manual 1173.9163.02 ─ 62
Start or stop value of the evaluation range.
Default unit: NN
See
CALCulate<Chn>:STATistics:DOMain:USER
See "Evaluation Range"
.
Channel number used to identify the active trace
ON | OFF - statistical info field on or off.
*RST: OFF
See
CALCulate<Chn>:STATistics[:STATe]
See "Min/Max/Peak-Peak, Mean/Std Dev/RMS"
.
Channel number used to identify the active trace
ZVAB | IMPedance | ADMittance
ZVAB
The results are based on unformatted wave quantities (voltages)
IMPedance
The results are based on resistance values
ADMittance
The results are based on conductance vaules
See "Format" on page 356
Command reference
SCPI command reference
on page 360
CALCulate<Chn>:
on page 355
987