R&S ZNB Series User Manual page 910

®
R&S ZNB/ZNBT
Manual operation:
CALCulate:FMODel:ISD:COUPon:MEASure:OPEN:FILename <String>
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD:COUPon:TYPE), this command loads the properties of the
Open coupon from a Touchstone file.
Parameters:
<String>
Manual operation:
CALCulate:FMODel:ISD:COUPon:MEASure:SHORt
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD:COUPon:TYPE), this command starts the measurement of
the Short coupon at the active ports (see
COUPon[:STATe]).
Usage:
Manual operation:
CALCulate:FMODel:ISD:COUPon:MEASure:SHORt:FILename <String>
For a fixture modeling with the ISD tool and coupon type OPSHort1x (see
CALCulate:FMODel:ISD:COUPon:TYPE), this command loads the properties of the
Short coupon from a Touchstone file.
Parameters:
<String>
Manual operation:
CALCulate:FMODel:ISD<Ph_pt>:COUPon[:STATe] <Boolean>
For a fixture modeling with the ISD tool, this command allows to specify the ports to
which the test coupon is connected.
This has to be defined before measuring the test coupon (using
ISD:COUPon:MEASure
CALCulate:FMODel:ISD:COUPon:MEASure:SHORt).
Suffix:
<Ph_pt>
Parameters:
<Boolean>
User Manual 1173.9163.02 ─ 62
See "Measure / Measure Open / Measure Short"
Path to the Touchstone file, either absolute or relative to the
selected working directory (CALCulate:FMODel:DIRectory).
See "Load File / 1x Open Preset / 1x Short Preset"
CALCulate:FMODel:ISD<Ph_pt>:
Event
See "Measure / Measure Open / Measure Short"
Path to the Touchstone file, either absolute or relative to the
selected working directory (CALCulate:FMODel:DIRectory).
See "Load File / 1x Open Preset / 1x Short Preset"
or
CALCulate:FMODel:ISD:COUPon:MEASure:OPEN
.
Physical port number
1 (ON, true) if the test coupon is connected to port <Ph_pt>, 0
(OFF, false) otherwise
Command reference
SCPI command reference
on page 630
on page 630
on page 630
on page 630
CALCulate:FMODel:
910
and