Calculate<Chn>:Marker<Mk>:Function:result; Calculate<Chn>:Marker<Mk>:Reference:function:result - R&S ZNB Series User Manual

®
R&S ZNB/ZNBT
Example:
Usage:
Manual operation:
The analyzer provides the following search modes:
Mode
MAXimum
MINimum
RPEak
LPEak
NPEak
TARGet
RTARget
LTARget
BFILter
Regular markers
only
MMAXimum or
MMINimum
SPRogress
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
CALCulate<Chn>:MARKer<Mk>:REFerence:FUNCtion:RESult?
Returns the result (stimulus and response value) of a search started by means of
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
MARKer<Mk>:REFerence:FUNCtion:EXECute. The search must be executed
before the command is enabled.
Suffix:
<Chn>
<Mk>
Example:
Usage:
Manual operation:
User Manual 1173.9163.02 ─ 62
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON
Create marker M1 and assign it to trace no. 1.
CALC:MARK:FUNC:EXEC MAX; RES?
Move the created marker to the absolute maximum of the trace
and query the stimulus and response value of the search result.
Setting only
See "Max / Min" on page 397
Find...
Absolute maximum in the search range (see
FUNCtion:DOMain:USER[:RANGe]
Absolute maximum in the search range
Next valid peak to the right of the current marker position
Next valid peak to the left
Next highest or lowest value among the valid peaks (next peak)
Target value (see CALCulate<Chn>:MARKer<Mk>:TARGet)
Next target value to the right of the current marker position
Next target value to the left
Bandfilter search. The results are queried using
BWIDth.
Multiple peak search
Sweep progress
.
Channel number used to identify the active trace
Marker number (ignored)
See
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
Query only
See "Max / Min" on page 397
Command reference
SCPI command reference
CALCulate<Chn>:MARKer<Mk>:
)
CALCulate<Chn>:MARKer<Mk>:
or
CALCulate<Chn>:
951