R&S ZNB Series User Manual page 341

®
R&S ZNB/ZNBT
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
5.5.3 All Mem All Data tab
Performs actions on all data or memory traces in the active recall set.
Background information
Refer to
All Data to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the
traces.
Remote command:
TRACe:COPY
All Data & Func to <Destination>
Stores the current data of all data traces in the active recall set to memory traces, in
accordance with the
traces.
For information on trace functions, see
All Data to <Destination>
Func to <Destination>" stores the trace after it has been transformed using trace func-
tions.
User Manual 1173.9163.02 ─ 62
"Trace types" on page 103.
Destination
Destination
stores the raw trace without the trace functions, "All Data &
setting. No trace functions are applied to the stored
setting. Trace functions are applied to the stored
"Data & Func to <Destination>"
GUI reference
Trace Config softtool
on page 340.
341